<optgroup id="jvhwr"></optgroup><object id="jvhwr"><option id="jvhwr"></option></object>
    <thead id="jvhwr"><del id="jvhwr"></del></thead>
      <thead id="jvhwr"><ol id="jvhwr"></ol></thead>
        <thead id="jvhwr"></thead>

        產品中心

        當前位置:首頁 > 產品中心 > 2105儀表

        BL2105型配料秤控制顯示儀表

        發布時間:2019/1/7 15:42:20      點擊次數:331

        BL2105型配料秤控制顯示儀表

        BL2105Batching Weighing Feeder Integrator
         

               BL-2015型稱重控制顯示儀表是轉為國內外各行業配料系統而開發研制,具備PID調節功能的總線型儀表。采用全友好人機界面,菜單驅動,LED顯示、操作簡單、長期可靠穩定、校準方便、并配備獨特的看門狗電路和自動復位電路。由于其可靠的穩定性能,精確的稱量精度,已經被廣泛應用于冶金、電力、有色金屬、煤炭、礦山、港口、碼頭等各行業的稱重顯示與批控制。


        Weighing Feeder Integrator Mode12105BatchingBL-2105 type weighing control display instrument is to be transferred to the domestic andforeign industry burden system and the development of research and development, with the PID regulatory function of the bus type instrument. Using the full friendly man-machine interface, menu driven, LED display, simple operation, long-term reliable and stable. easy calibration, and equipped with a unique watchdog circuit and automatic reset circuit. Due to its reliable and stable performance, accurate weighing accuracy has been widely used in metallurgy. electric power, nonferrous metals, coal. mining, ports. docks and other industries weighing display and batch control


        主要技術性能

        四行中文LED顯示,菜單方式選擇;

        五個狀態信號指示燈;

        人機界面的形式,易于操作和日常維護;

        按鍵采用輕觸防腐鍵盤;

        自動調零、自動調間隔;

        自動零點跟蹤;

        光電耦合的數字輸出和輸入;

        故障報警提示;

        標準通訊接口可選:RS232C、RS485通訊接口;

        物料總量的脈沖輸出。


        Four lines of Chinese LED display. menu mode selection;

        Five status signal indicator;

        Form of man-machine interface. easy to operate and daily maintenance;

        Press the touch keyboard anticorrosion;

        Automatic zero adjustment. automatic adjustment:

        Automatic zero tracking;

        Digital output and input for optoelectronic coupling;

        Fault alarm prompt;

        Standard communication interface optional: RS232C. RS485 communication interface;

        Pulse output of total material.


        I/O及通訊性能:

        主板數字輸入端口.儀表主板提供3個可編程輸入端口,接收無源觸點開關信號。

        主板數字輸出端口  儀表主板提供3個可編程輸出端口,24VDC集電極開路輸出或250V、3A無源觸點。

        可直接驅動控制繼電器。

        通訊板:儀表安裝通訊板后可使用標準RS-232.RS-485串行接口與上位機通訊,上位機可采集儀表數據并對儀表進行操作。


        Motherboard digital input port: the instrument main board provides 3 programmable input port. receives the passive contact switch signal.

        Motherboard digital output port: the instrument board to provide 3 programmable output port. 24VDC open collector output or 250V. 3A

        passive contacts.

        Direct drive control relay.

        Communication board: after the instrument installation communication board can use standard RS-485, RS-232 serial interface and host

        computer communication, the host computer can collect instrument data and operation of the instrument.


        主要功能

        1、測量功能:瞬間流量計算、流量累計、自動調零和調間隔、自動零點跟蹤和電流輸出信號。

        2、監測功能:可提供狀態提示、過程報警、設定錯誤、設備故障、高流量報警、高負載報警、低負載報警、高控制偏差。

        3、自動控制給料功能:具備兩個獨立的控制電流環。第一個控制電流環通常用于控制給料量,第二個電流環通常用于控制其他設備,控制方式為PID=比例+微分,可控制的過程變量為給料量、速度或皮帶秤載荷、流量設定點可通過鍵盤輸入、串行通訊或外部模擬信號設定??刂戚敵鰹?-20mA電流環。


        Major function

        l, measurement: instantaneous flow rate calculation. the cumulative flow, automatic zero adjustment and adjustable interval, automatic

        ze ro tracking and  current output signal

        2. monitoring function: provide state prompt, process alarm, setting error, equipment failure, high flow alarm, alarm. low alarm, high load

        high load deviation control.

        3, automatic control feeding function: with two independent control current loop. The first current loop control is normally used to control

        the feeding amount. the second current loop is often used to control other devices. control PID= proportional plus differential and process

        variables can be controlled for to feed, speed or load of belt weigher. flow set point can be input through the keyboard, serial pass or

        external analog signal set

        To control the output current of 4-20mA ring.


        通訊模板卡選擇

        1, 4-20mA電流板;

        2, RS232. RS485通訊板;

        3, Profibus DP通訊板;

        4, Modbus通訊板;

        5, 脈沖信號輸出。

         

        1, 4-20mA current board;

        2, RS232.  RS485 communication board;

        3, the Profibus DP communication board;

        4, Modbus communication board;

        5, the output pulse signal.



        亚洲综合欧美在线一区-自拍亚洲欧美在线成电影-又黄又爽又色的视频